Welcome!

@ThingsExpo Authors: Shelly Palmer, Karthick Viswanathan, Elizabeth White, Liz McMillan, Pat Romanski

Related Topics: @ThingsExpo, @CloudExpo, @BigDataExpo

@ThingsExpo: Article

IoT Challenge and #FogComputing | @ThingsExpo #IoT #M2M #BigData

Fog Computing is being touted as the data communication solution our Internet of Things (IoT) devices are asking for

Fog Computing is being touted as the data communication solution our Internet of Things (IoT) devices are asking for by bringing the power of cloud computing closer to the end user. The fact is, the number of connected devices is going to continue to grow exponentionally. In fact, Gartner predicts that by 2020 IoT will include 26 billion connected things. Consider the impact that amount of data collected and processed will have.The Challenge

Naturally, with billions of devices all connected to the cloud for manufacturing, oil and gas, utilities, municipalities and enterprise, to name a few, the data transmission and processing rate is bound to slow down - especially if the current cloud architecture is upheld.

Fog Computing: IoT by 2020

Some IoT devices use the cloud to store data long term, where other connected things send data to the cloud to be analyzed and sent back to the device with operational instructions. Ahmed Banafa with SemiWiki explains, "As dependence on our newly connected devices increases along with the benefits and uses of a maturing technology, the reliability of the gateways that make the IoT a functional reality must increase and make up-time a near guarantee."

Fog Computing Explained

What Is Fog Computing?
Fog Computing is a term coined by Cisco, that offers a way to analyze the data closer to the IoT device, thus saving valuable milliseconds. It may be hard to believe, but a millisecond has the power to prevent a M2M line shut-down, increase the speed at which power is restored to utilities and prevent an oil rig from leaking, just to name a few.

An easy way to visually understand where Fog Computing fits in our IoT M2M world, is by looking at the diagram above. It clearly shows that Fog Computing hangs between the cloud and the device, much like the fog on an early San Francisco morning.

Fog Computing operates at the network edge, extending the cloud capabilities closer to the source (IoT device). Each IoT connection works with what's called Fog Nodes to digest the intelligent data and then coordinate operational next steps, whether that be acting directly and or transmitting results to the cloud. The diagram below covers the types of response times IoT devices face from both Fog Nodes and main cloud locations.

Fog Computing Nodes

Fog Computing Brings Efficiency to Enterprise
A recent report by Machina Research highlights the companies that pioneered Fog Computing and those poised to capitalize on the benefits in their near future. These companies are able to control the intelligent data at the edge of the network, saving time and creating a more stream-line approach to sending and receiving data efficiently and more securely.

Overall, as our need to connect explodes, we will not only need to think about IoT, but also the way in which intelligent data is processed from the critical infrastructure and back to the cloud. Fog Computing will continue to open more efficient channels across our IoT, as long as we allow it.

More Stories By Scott Allen

Scott is an executive leader with more than 25 years of experience in product lifecycle management, product marketing, business development, and technology deployment. He offers a unique blend of start-up aggressiveness and established company executive leadership, with expertise in product delivery, demand generation, and global market expansion. As CMO of FreeWave, Scott is responsible for product life cycle/management, GTM execution, demand generation, and brand creation/expansion strategies.

Prior to joining FreeWave, Scott held executive management positions at Fluke Networks (a Danaher Company), Network Associates (McAfee), and several start-ups including Mazu Networks and NEXVU Business Solutions. Scott earned his BA in Computer Information Systems from Weber University.

@ThingsExpo Stories
SYS-CON Events announced today that N3N will exhibit at SYS-CON's @ThingsExpo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. N3N’s solutions increase the effectiveness of operations and control centers, increase the value of IoT investments, and facilitate real-time operational decision making. N3N enables operations teams with a four dimensional digital “big board” that consolidates real-time live video feeds alongside IoT sensor data a...
Mobile device usage has increased exponentially during the past several years, as consumers rely on handhelds for everything from news and weather to banking and purchases. What can we expect in the next few years? The way in which we interact with our devices will fundamentally change, as businesses leverage Artificial Intelligence. We already see this taking shape as businesses leverage AI for cost savings and customer responsiveness. This trend will continue, as AI is used for more sophistica...
SYS-CON Events announced today that Mobile Create USA will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Mobile Create USA Inc. is an MVNO-based business model that uses portable communication devices and cellular-based infrastructure in the development, sales, operation and mobile communications systems incorporating GPS capabi...
SYS-CON Events announced today that Enroute Lab will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enroute Lab is an industrial design, research and development company of unmanned robotic vehicle system. For more information, please visit http://elab.co.jp/.
SYS-CON Events announced today that Suzuki Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Suzuki Inc. is a semiconductor-related business, including sales of consuming parts, parts repair, and maintenance for semiconductor manufacturing machines, etc. It is also a health care business providing experimental research for...
Real IoT production deployments running at scale are collecting sensor data from hundreds / thousands / millions of devices. The goal is to take business-critical actions on the real-time data and find insights from stored datasets. In his session at @ThingsExpo, John Walicki, Watson IoT Developer Advocate at IBM Cloud, will provide a fast-paced developer journey that follows the IoT sensor data from generation, to edge gateway, to edge analytics, to encryption, to the IBM Bluemix cloud, to Wa...
SYS-CON Events announced today that Massive Networks, that helps your business operate seamlessly with fast, reliable, and secure internet and network solutions, has been named "Exhibitor" of SYS-CON's 21st International Cloud Expo ®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. As a premier telecommunications provider, Massive Networks is headquartered out of Louisville, Colorado. With years of experience under their belt, their team of...
SYS-CON Events announced today that Nihon Micron will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Nihon Micron Co., Ltd. strives for technological innovation to establish high-density, high-precision processing technology for providing printed circuit board and metal mount RFID tags used for communication devices. For more inf...
SYS-CON Events announced today that mruby Forum will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. mruby is the lightweight implementation of the Ruby language. We introduce mruby and the mruby IoT framework that enhances development productivity. For more information, visit http://forum.mruby.org/.
In his session at @ThingsExpo, Greg Gorman is the Director, IoT Developer Ecosystem, Watson IoT, will provide a short tutorial on Node-RED, a Node.js-based programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. It provides a browser-based editor that makes it easy to wire together flows using a wide range of nodes in the palette that can be deployed to its runtime in a single-click. There is a large library of contributed nodes that help so...
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http:...
SYS-CON Events announced today that SIGMA Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. uLaser flow inspection device from the Japanese top share to Global Standard! Then, make the best use of data to flip to next page. For more information, visit http://www.sigma-k.co.jp/en/.
SYS-CON Events announced today that Daiya Industry will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Daiya Industry specializes in orthotic support systems and assistive devices with pneumatic artificial muscles in order to contribute to an extended healthy life expectancy. For more information, please visit https://www.daiyak...
SYS-CON Events announced today that B2Cloud will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. B2Cloud specializes in IoT devices for preventive and predictive maintenance in any kind of equipment retrieving data like Energy consumption, working time, temperature, humidity, pressure, etc.
SYS-CON Events announced today that NetApp has been named “Bronze Sponsor” of SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. NetApp is the data authority for hybrid cloud. NetApp provides a full range of hybrid cloud data services that simplify management of applications and data across cloud and on-premises environments to accelerate digital transformation. Together with their partners, NetApp em...
What is the best strategy for selecting the right offshore company for your business? In his session at 21st Cloud Expo, Alan Winters, U.S. Head of Business Development at MobiDev, will discuss the things to look for - positive and negative - in evaluating your options. He will also discuss how to maximize productivity with your offshore developers. Before you start your search, clearly understand your business needs and how that impacts software choices.
SYS-CON Events announced today that Interface Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Interface Corporation is a company developing, manufacturing and marketing high quality and wide variety of industrial computers and interface modules such as PCIs and PCI express. For more information, visit http://www.i...
SYS-CON Events announced today that Keisoku Research Consultant Co. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Keisoku Research Consultant, Co. offers research and consulting in a wide range of civil engineering-related fields from information construction to preservation of cultural properties. For more information, vi...
SYS-CON Events announced today that MIRAI Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MIRAI Inc. are IT consultants from the public sector whose mission is to solve social issues by technology and innovation and to create a meaningful future for people.
SYS-CON Events announced today that Fusic will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Fusic Co. provides mocks as virtual IoT devices. You can customize mocks, and get any amount of data at any time in your test. For more information, visit https://fusic.co.jp/english/.